TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
IP Address Mode AutoIP
Automatically sets the IP address.
DHCP
Uses DHCP to set the IP address.
BOOTP
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
Manually Set
Manually sets the IP address.
IP Address
Manually sets the IP address allocated to the printer.
Subnet Mask
Manually sets the subnet mask.
Gateway Address
Manually sets the gateway address.
Apply New Settings
After you complete the settings, click
Apply New Settings
to apply the changes.
Restart printer to apply new settings
Click
Restart printer to apply new settings
to apply the changes.
Network Settings
Purpose:
To display the server settings of the
Dell Printer Configuration Web Tool
.
NOTE:
When the printer is connected to the USB port, this setting cannot be displayed.
Values:
Print Server
Display
Click to display the server settings for the
Dell Printer Configuration Web Tool
.
Settings
Display of Dell
Off
Turns off the display of the server settings for the
Dell Printer Configuration Web
Configuration Web
Tool
.
Tool
On
Turns on the display of the server settings for the
Dell Printer Configuration Web
Tool
.
Apply New Settings
After you complete the settings, click
Apply New Settings
to apply the changes.
Restart printer to apply new settings
Click
Restart printer to apply new settings
to apply the changes.
Understanding the Tool Box Menus
120