Reports
Purpose:
To print the settings and history information of your printer.
Values:
Printer Settings
Click
Start
to print the printer settings page.
Device Settings
Click
Start
to print the device settings page.
Job History
Click
Start
to print the Job History report.
Error History
Click
Start
to print the Error History report.
Color Test Page
Click
Start
to print the Color Test Page.
Printer Settings
The
Printer Settings
tab contains the
System Settings
,
USB Settings
, and
Secure Settings
pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
*1
Specifies the time taken by the printer before it enters Sleep mode after it finishes a job.
Power Saver Time - Deep
Specifies the time taken by the printer before it enters Deep Sleep mode after it goes into Sleep
Sleep
mode.
Power Saver Time - Auto-Off
Specifies the time it takes to automatically turn off the printer after it has entered Deep Sleep
Timer
*2
mode.
Fault Time-Out
Specifies the time taken by the printer before it cancels jobs that stop abnormally. The print job is
cancelled if it times out.
Job Time-Out
Specifies the amount of time that the printer waits for data to arrive from the computer. The print
job is cancelled if it times out.
mm / inch
*3
Specifies the measurement unit displayed after the numeric value on the operator panel.
Default Paper Size
Specifies the default paper size.
Disable printing with larger
Specifies whether to print jobs if the paper set in the tray of the printer is larger than the paper
paper size
*4
size set in the printer driver (the paper size does not have to match).
Auto Log Print
Specifies if a job history needs to be printed after every 10 jobs.
Low Toner Alert Msg
Alerts you if the toner is low.
Panel Language
Used to set the language on the operator panel.
*
1
Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. This uses less energy, but requires more
warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum
warm-up time. Select a value between 5 and 30 minutes for the Sleep mode if you want a balance between energy consumption and a
shorter warm-up period.
The printer automatically returns to the standby mode from the Sleep mode when it receives data from the computer. You can also
return the printer to the standby mode by pressing any button on the operator panel.
*
2
Auto-Off Timer feature is available only in certain regions.
*
3
The default for mm/inch and Default Paper Size vary depending on country-specific factory default.
*
4
Disable printing with larger paper size is available only in the Dell Printer Configuration Web Tool and the Tool Box.
Dell™ Printer Configuration Web Tool
93
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
