4.
Controlling fixtures
4.1
Select fixtures
Select a single fixture
: Press the handle Fixture buttons for the
fixtures you want. The LED in the Fixture button comes on for selected
fixtures
Select a range of fixtures
: To select a range of fixtures, hold down
the Fixture button for the first fixture then press the Swop button for the
last fixture.
Stepping through selected fixtures one at a time
: If you have
selected a range of fixtures, our console has functions to step through
the selected fixtures one at a time. This can make it easier to program
a range of fixtures because you don’t have to select each one manually.
Pressing <
> or <
> in “Fixture control area”, it will select the fixtures
in the range one at a time. If <HiLight> button is activated, The
selected fixture from the range will light up, and the other fixtures will
go out.
Activate previously selected fixtures
: To activate all the previously
selected fixtures, press <All> in “Fixture control area”.
Select fixtures at odd positions
: Press <Odd>, the fixtures at odd
positions of the selected fixtures will keep selected, but, those at even
positions will be de-selected. This is related to the order that you
selected the fixtures before pressing <Odd>.
Select fixtures at even positions
: Press <Even>, the fixtures at
even positions of the selected fixtures will keep selected, but, those at
odd positions will be de-selected. This is related to the order that you
selected the fixtures before pressing <Even>.
4.2
Modify an attribute value
1)
Select a fixture.
2)
Select an attribute. Then, use <Wheel A> and <Wheel B> to adjust the
value. Or, switch to Attribute mode to adjust the attribute value by
faders.
3)
To see the output values, press <Output>.
4.3
Advanced options
Locate fixtures
: Select fixtures; Press <Locate> in “Fixture control
area” to locate the fixtures. Fixture locating is provided in the fixture
library.
Align fixtures
: Select fixtures; Press <ML> in “Fixture control area”
then <A>, all the attribute values of all the selected fixtures will be
aligned to the first fixture.
Align attributes
: Select fixtures and select attributes; Press <ML> in