7.3
Copying a Scene
1)
Press <Copy>, then, press a <Playback> button that stores a scene;
2)
Press an empty <Playback> button to copy.
7.4
Delete a Scene
1)
Press <Delete> to enter the Delete menu;
2)
Press a desired <Playback> button to delete; press it again to confirm.
7.5
Time
Press <Time>, then, press a desired <Playback> button for editing. You can
set a fade in and fade out time independently for every memory. The playback
fades only affect HTP (intensity) channels. There is a separate LTP timer which
allows you to set movement times. LTP channels which were set to “I” during
Patching ignore LTP fade times.
The effect of the times is shown in the following picture.
The times you enter are also affected by the scene mode:
Mode 0 – No timing information is used. The HTP channels faded with
the 0-100% position with playback faders.
Mode 1 –Channels fade as set by the HTP and LTP fade times (except
Instant LTP channels). If you enter times for a Mode 0 memory, it will
automatically change to Mode 1. If HTP times are set to zero, the HTP
levels will fade with the fader
Mode 2 –HTP channels fade as set by the HTP times, or with the fader if
LTP
V
al
ue
LTP Wait Time
LTP Fade Time
LTP
value
controlled by
next step
Next LTP Wait
begins here
Next Wait In begins
here
HTP
L
ev
el
Wait In Time
Fade In Time
Wait Out Time
Fade Out Time