ENGLISH

11

OPERATIONS & EXTERNAL DEVICES

Listening to the other external components

You can connect an external component to AUX (auxiliary) input jack on the control panel.
Preparation: Make sure “

AUX ON” is selected in the “SRC SELECT” 

=

 “

AUX IN” setting, see page 16.

1

Select “AUX IN.”

2

—

Turn on the connected component and start playing the source.

3

Adjust the volume.

4

—

Adjust the sound as you want (see pages 12 and 13).

Connecting an external component to the AUX input jack

3.5 mm stereo mini plug
(not supplied)

Portable audio player, etc.

•  This unit may not be able to play the files depending 

on the type of USB device.

•  Operation and power supply may not work as 

intended for some USB devices.

•  You cannot connect a computer to the USB input 

terminal of the unit.

•  Make sure all important data has been backed up to 

avoid losing the data.

•  Do not leave a USB device in the car, expose to direct 

sunlight, or high temperature to avoid deformation 
or cause damages to the device.

•  Some USB devices may not work immediately after 

you turn on the power.

•  For more details about USB operations, see page 18.

To stop play and detach the USB device

Straightly pull it out from the unit.
•  Press SRC to listen to another playback source.

You can operate the USB device in the same way you 
operate the files on a disc. (See pages 9 and 10.)

Cautions:

•  Avoid using the USB device if it might hinder your 

safety driving.

•  Do not pull out and attach the USB device repeatedly 

while “READING” is shown on the display.

•  Do not start the car engine if a USB device is 

connected.

EN10-15_KD-R506_001A_f.indd   11

EN10-15_KD-R506_001A_f.indd   11

9/10/08   4:20:28 PM

9/10/08   4:20:28 PM