ENGLISH

18

Category Menu items

Selectable settings, [reference page]

AUDIO

FADER

*

7,

*

8

Fader

R06 – F06

:  Adjust the front and rear speaker output balance.
  (Initial: 00)

BALANCE  

*

8

Balance

L06 – R06

:  Adjust the left and right speaker output balance.
  (Initial: 00)

LOUD
Loudness

•  LOUD OFF
•  LOUD ON

: Cancels.
:  Boost low and high frequencies to produce a well-balanced 

sound at a low volume level.

VOL ADJUST
Volume adjust

VOL ADJ –05 
—
VOL ADJ +05
(Initial: VOL 
ADJ 00)

:  Preset the volume adjustment level of each source (except 

FM), compared to the FM volume level. The volume level 
will automatically increase or decrease when you change the 
source.

  •  Before making an adjustment, select the source you want to 

adjust.

  •  “VOL ADJ FIX” appears on the display if “FM” is selected as 

the source.

L/O MODE
Line output 
mode

•  SUB.W

•  REAR

:  Select if the REAR LINE OUT terminals are used for connecting 

a subwoofer (through an external amplifier).

:  Select if the REAR LINE OUT terminals are used for connecting 

the speakers (through an external amplifier).

SUB.W FREQ 

*

9

Subwoofer 
cutoff frequency

•  LOW 
•  MID
•  HIGH 

:  Frequencies lower than 72 Hz are sent to the subwoofer.
:  Frequencies lower than 111 Hz are sent to the subwoofer.
:  Frequencies lower than 157 Hz are sent to the subwoofer.

SUB.W LEVEL 

*

9

Subwoofer level

SUB.W 00 
— SUB.W 08

:  Adjust the subwoofer output level.
  (Initial: SUB.W 04)

BEEP
Key touch tone

•  BEEP OFF
•  BEEP ON

:  Deactivates the key touch tone.
:  Activates the key touch tone.

TEL MUTING
Telephone 
muting

•  MUTING 1/

MUTING 2

•  MUTING OFF

:  Select either one which mutes the sounds while using a 

cellular phone.

: Cancels.

AMP GAIN 

*

10

Amplifier gain 
control

•  LOW POWER

•  HIGH POWER

:  VOLUME 00 – VOLUME 30 (Select if the maximum power 

of each speaker is less than 50 W to prevent damaging the 
speaker.)

:  VOLUME 00 – VOLUME 50

*

7

  If you are using a two-speaker system, set the fader level to “00.”

*

8

  This adjustment will not affect the subwoofer output.

*

9

  Displayed only when “

L/O MODE” is set to “SUB.W.”

*

10

  The volume level automatically changes to “VOLUME 30” if you change to “

LOW POWER” with the volume level 

set higher than “VOLUME 30.”

EN16-21_KD-R501_003A_f.indd   18

EN16-21_KD-R501_003A_f.indd   18

9/10/08   11:11:33 AM

9/10/08   11:11:33 AM