![background image](/i/kawasaki/160295/kawasaki-vn1600-classic-2003/h/kawasaki-vn1600-classic-2003-172.png)
4-10 COOLING SYSTEM
Water Pump
Water Pump Removal
•
Drain the coolant (see Coolant Change in the Periodic
Maintenance chapter).
•
Remove:
Water Hose Clamp [A]
Water Hose [B]
Front [C]
•
Remove:
Water Pump Cover Bolts [A]
Water Pump Cover [B]
•
Remove:
Impeller Bolt [A]
Impeller [B]
NOTE
○
The impeller bolt has left-hand threads. Turn the bolt
clockwise and remove it.
Water Pump Installation
•
There are aluminum washers [A] on rear side of the wa-
ter pump cover [B]. Replace them with new ones when
installing.
Front [C]
Torque - Water Pump Cover Bolts: 11 N·m (1.1 kgf·m, 95
in·lb)
•
Insert the pump inlet hose until the hose end [A] touches
the pump inlet step [B].
•
Tighten the hose clamp screw securely.