![background image](/i/kawasaki/160295/kawasaki-vn1600-classic-2003/h/kawasaki-vn1600-classic-2003-538.png)
16-92 ELECTRICAL SYSTEM
Junction Box
The junction box [A] has fuses [B], relays, and diodes.
The relays and diodes can not be removed.
Junction Box Fuse Circuit Inspection
•
Remove the right side cover (see Frame chapter).
•
Remove the junction box.
•
Pull off the connectors from the junction box.
•
Make sure all connector terminals are clean and tight, and
none of them have been bent.
Clean the dirty terminals, and straighten slightly-bent ter-
minals.
•
Check conductivity of the numbered terminals with the
hand tester (see Junction Box Internal Circuit).
If the tester does not read as specified, replace the junc-
tion box.
Fuse Circuit Inspection
Tester Connection
Tester Reading (
Ω
)
Tester Connection
Tester Reading (
Ω
)
1 – 1A
0
1A – 8
∞
1 – 2
0
2 – 8
∞
3A – 4
0
3A – 8
∞
6 – 5
0
6 – 2
∞
6 – 10
0
6 – 3A
∞
6 – 7
0
17 – 3A
∞
6 – 17
0
Starter Circuit/Headlight Relay Inspection
•
Remove the junction box.
•
Check conductivity of the following numbered terminals
by connecting the hand tester and one 12 V battery to the
junction box as shown (see Junction Box Internal Circuit).
If the tester does not read as specified, replace the junc-
tion box.