![background image](/i/kawasaki/160295/kawasaki-vn1600-classic-2003/h/kawasaki-vn1600-classic-2003-261.png)
ENGINE LUBRICATION SYSTEM 7-11
Oil Pump and Oil Line
•
Install each bottom end of the oil hoses on the right
crankcase behind the rear cylinder as shown.
Front Oil Hose [A]
Rear Oil Hose [B]
Front [C]
○
Face the paint marks [D] rearward.
•
Replace the copper washers on each side of the banjo
bolt with new ones.
Torque - Oil Hose Banjo Bolt [E]: 9.8 N·m (1.0 kgf·m, 87
in·lb)
•
Install the removed ports.
Inside Oil Pipe Removal
•
Split the crankcase (see Crankshaft/Transmission chap-
ter).
•
Remove:
Oil Pipe Clamp Bolts [A]
Oil Pipe Holder Bolt [B]
•
Remove the inside oil pipe [C] from the right crankcase.
•
Remove the oil pipe clamp bolt [A], and oil return pipe [B].
•
Remove the separator [A].