![background image](/i/kawasaki/160295/kawasaki-vn1600-classic-2003/h/kawasaki-vn1600-classic-2003-440.png)
15-8 FRAME
Side Covers
Left Side Cover Removal
•
Insert the ignition switch key [A] into the left side cover,
and turn the key clockwise until the key slot is vertical.
•
Pull [B] the rear part of the left side cover, push [C] the left
side cover slightly forward, and remove it.
Left Side Cover Installation
•
Put the front stoppers [A] into the grommets [B] first, then
put the rear stopper into the grommet.
•
Turn the ignition switch key [A] counterclockwise until the
key slot is horizontal [B] to secure the left side cover.
Right Side Cover Removal/Installation
•
Remove the screw [A].
CAUTION
Be careful not to scratch the right side cover sur-
face with the rear exhaust pipe [B] during removal
or installation.
•
Cover the rear exhaust pipe with a shop towel and pull
the right side cover evenly outward to clear the stoppers.
•
Pull the right side cover off the grommets [C] and remove
the cover.
Front [D]
•
Put the stoppers into the grommets.
•
Tighten the screw.