![background image](/i/kawasaki/160295/kawasaki-vn1600-classic-2003/h/kawasaki-vn1600-classic-2003-200.png)
5-20 ENGINE TOP END
Rocker Case Cover
Rocker Case Cover Removal
•
Remove the engine (see Engine Removal/Installation
chapter).
•
Remove the bolts [A] and take off the cover [B] from the
rocker case.
•
Take out the oil filter springs [A] and HLA oil filters [B].
Rocker Case Cover Installation
•
Replace the HLA oil filters [A] with new ones.
•
Install the oil filter springs [B]
•
After installing the rocker case, fill the oil reservoir [C] with
engine oil.
•
Replace the cover gasket [D] with a new one.
•
Tighten the cover bolts [E] to the specified torque follow-
ing the tightening sequence.
Dowel Pins [F]
Inlet Side [G]
Torque - Rocker Case Cover Bolts: 8.8 N·m (0.90 kgf·m, 78
in·lb)