Connection
MediaVision 3D as a Player
The audio signals are processed via your TV set in this configuration.
MediaVision
serves as an audio and video source *.
Connect the
HDMI OUT
socket of the
MediaVision 3D
to an
HDMI IN
socket on
your TV set using the HDMI cable provided.
Go to the
Audio
menu and set the option
Preamplifier
to
off
Use an RJ-45 network cable (available from your dealer) to connect
MediaVision
3D
to a network connection (e.g. Switch or DSL router) with a connection to the
Internet/Homenetwork.
Connect the
ANTENNA FM
socket via an FM antenna cable (available from your
dealer) to an antenna socket, or use the antenna provided at this socket.
Plug the small plug of the mains cable into the rear of the unit (page 7) and
then plug the large plug of the mains cable into a 220-240V 50/60 Hz socket.
- 14
TV set
MediaVision 3D
Network cable
Mains cable
HDMI cable
FM Radio Antenna
* Only PCM Stereo or PCM multi-channel
