![background image](/i/loewe/154190/loewe-mediavision-3d/h/loewe-mediavision-3d-023.png)
Start-up
Network Menu
Your
MediaVision 3D
can be connected via the
LAN
connection on the rear to a
home network (LAN) with Internet connection (page 11 to 13). That means you
can use the BD-LIVE™ service, which provides you with optional accompanying
material from the manufacturer of the Blu-ray Disc™.
In the
Network
Menu you can make the settings required for your home network.
:
BD-LIVE connection
Partially permitted
Prohibited
Connection Status
Permitted
Connection Setting
.
Display
Audio
Language
Dolby PL II
Lock
Network
Others
Set network connection automatically
If your home network has a DHCP server (e.g. a DSL router),
your
MediaVision 3D
can automatically set all network parameters.
Call up the Main Menu.
3456
Select the
Setup
option.
5
6
Select the
Network
option.
45
6
Select the
Connection settings
s.
Press
OK
to confirm.
The
Connection Settings
Menu appears.
Connection Setting
IP Mode
DNS Server
IP Adress
Subnet Mask
Primary
Gateway
Secondary
Cancel
Dynamic
Auto
Manual
Static
OK
Press
OK
to confirm.
Your
MediaVision 3D
will now attempt to establish a
connection to the Internet router in your home network. The
standard setting shown above (IP Mode: Dynamic, DNS server:
Auto) is used for the automatic search for the network
parameters.
If a dynamic IP address has been assigned, a corresponding
message will appear.
Connection Setting
Setting Wired Dynamic IP completed.
For the connection test, press ‘Test‘.
Test
OK
34
Select the option
Test
to perform a connection test.
Press
OK
to confirm.
e8:5b:5b:c1:ad:ab
192.168.0.10
255.255.255.0
192.168.0.5
192.168.0.5
192.168.1.5
Connection Status
Network is not connected.
Wired Network
MAC:
IP:
Subnet Mask:
Gateway:
Internet: Success
Local area network:Success
Setting
Test
OK
Primary DNS:
Secondary DNS:
If the connection test was successful, a corresponding
message will be displayed in the
Connection Status
Menu.
OK
Close menu
Test
Repeat connection test
Settings
Call up the
Connection Settings
Menu
Connection Status Menu
You can display the network parameters currently set.
Call up the Main Menu.
3456
Select the
Setup
option.
5
6
Select the
Network
option.
45
6
Select the option
Connection status
.
Press
OK
to confirm.
The
Connection status
Menu appears.
23 -