Octave
Shifts the pitch of the specified voice or track up or down by octaves.
A setting of “0” produces normal pitch.
You can adjust the range of the pitch change in octaves for each
keyboard part (R1, R2, R3, L).
Scale Tune
Turn on Scale Tune
Method 1:
1.
In the octave setting area, press the R1 “0” button to call up a pop-
up box showing the adjustable range of parameter.
2.
Use the DATA DIAL or [+] / [-] button to adjust parameter value. Or
you can also press the screen button “▲” or “▼”.
Method 2:
1.
Firstly, press PART ON/OFF button to select a voice part, or you can
also press the corresponding area in the main display.
2.
Press the panel button [OCTAVE +] or [OCTAVE -] to set the value,
the range of parameter is from -1~+1.
3.
Press the “OK” button to confirm your operation. Or wait about
seconds, the “OK” message box will disappear, the system commit
ok command by default.
4.
Press the [OCTAVE +] and [OCTAVE -] buttons simultaneously to
revert the default value: 0.
Scale Tune allows tuning each note within a octave, the same notes in
all octaves will be affected. The notes can be tuned from -50 to +50
cents (1 cent = 1/100 of a semitone). You can use the scale tune to
play in different scales, including classic and Arabic.
In the scale tune setting area, press the button to switch this
function on or off. When the Scale Tune function is set to ON, the color
of message box and the button will be changed from gray to
orange.
1.
In the scale tune setting area, press the Recall"Pure Major" to call
up a pop-up box showing the scale types.
2.
Use the DATA DIAL or [+] / [-] button to adjust parameter value. Or
you can also press the screen button "+" or "-".
Select Preset Scale Types
Voice
25
0
5
25
75
95
100
aw_A1000_Manual_G13_141128_PB
2014
12
1
14:46:31