BASIC COPY MODES

- 47 -

1

2

3

4

5

6

Density Adjustment

This equipment detects the density level of originals and 
automatically adjusts the density level of the copied image to 
the optimal one. Alternatively, you can manually adjust it to the 
desired level.

Adjusting automatically (automatic density 

adjustment)

Press [AUTO] on the touch panel.

Memo

• The default setting of the automatic density adjustment is as 

follows according to the color modes:

FULL COLOR or AUTO COLOR: 

OFF

BLACK: 

ON

Adjusting manually

Press either 

 or 

 to select the desired density level.

Enlargement and Reduction 

Copying

You can change the reproduction ratio of copied images in the 
following procedures:

Automatic Magnification Selection (AMS):

You need to specify the copy paper size in advance. Then this 
equipment will detect the original size and automatically select 
the optimal reproduction ratio for the copy paper size.

Specifying both original size and copy paper size 

separately:

You need to specify both the original size and the copy paper 
size separately in advance. According to the sizes you 
specified, the optimal reproduction ratio is selected 
automatically. This feature is used when Automatic 
Magnification Selection is not available, such as when copying 
OHP film originals.

Specifying reproduction ratio manually:

You can select the desired reproduction ratio by pressing 
[ZOOM] or one-touch zoom buttons on the touch panel.

Copying photo originals in the optimal reproduction 

ratio for copy paper size (PHOTO ZOOM)

You can copy photo originals in the reproduction ratio best 
suited to the copy paper size.

Memo

• The available range of reproduction ratio differs depending 

on whether the original is placed on the original glass or on 
the RADF (Reversing Automatic Document Feeder).

Original glass: 25 to 400%
RADF: 25 to 200%

Automatic Magnification Selection 
(AMS)

Specify the copy paper size in advance so that this equipment 
will detect the original size and automatically select the optimal 
reproduction ratio to the copy paper size.
This function is available when the size of the originals is as 
follows:
North America: LG, LT
Other than North America: A4, B5 and FOLIO (FOLIO is 
available only when the RADF is used.)