BASIC COPY MODES

- 49 -

1

2

3

4

5

6

5

Select other copy modes as required, and 
then press the [START] button on the 
control panel.



Registering paper sizes to “OTHER” 
size

If you want to select a size other than the following for the 
original size and copy paper size, you need to register the size 
as “OTHER” following the procedures below. Once you register 
this size, it will be specified every time you press [OTHER] on 
the touch panel.
North America: LG, LT,ST
Other than North America: A4, B5

Note

• You can register only standard sizes as [OTHER] and 

cannot register any non-standard sizes.

1

Press [SIZE SETTING] on the touch panel.

2

Select the desired size.

The selected size will be registered as an “OTHER” size.

Specifying reproduction ratio manually

1

Place paper in the tray(s).

2

Place the original(s).

3

Press [ZOOM] on the touch panel.

4

Press the buttons below to select the 
desired reproduction ratio.

[

UP] and [

DOWN] buttons

The reproduction ratio changes by 1% every time 
either of them is pressed. When you hold either down, 
the ratio goes up or down automatically.

One-touch zoom buttons

Select the desired ratio from [400%], [200%], [100%], 
[50%] and [25%].

Note

• When the RADF is used, the maximum ratio available 

is 200%.