50

51

Register camera preset positions

Register the current camera position as a preset position. The preset positions can be registered only when 
using a camera supporting the preset position function. 

Step 1

When displaying the images on a 4-screen, select the 
desired cameras. 

Step 2

Click the [Detail] button.
 →  The "Camera control [Advanced]" panel will be 

displayed. (☞ Page 46)

Step 3

Perform the pan/tilt operation to move the camera to 
the position to be registered. (☞ Page 47)

Step 4

Click the [

D]/[C] button in the [Position] box to select 

a preset number. Select a preset number (1 - 256) to 
be registered. 

Note:

 •  On some Panasonic camera models, preset posi-

tion number 0 is registered as home position. 
Refer to the "readme.txt" on the provided 
CD-ROM about supported cameras.

Step 5

Click the [Regist] button. 
 →  The camera direction will be registered to the 

selected preset position number. 

Move camera preset positions

Move the camera to the registered preset position. It is necessary to register preset positions in advance. 

Step 1

When displaying the images on a 4-screen, select the 
desired cameras. 

Step 2

Click the [Detail] button.
 →  The "Camera control [Advanced]" panel will be 

displayed. (☞ Page 46)

Step 3

Click the [

D]/[C] button in the [Position] box to select 

a preset number. Select a preset number (0 - 256) to 
be registered. Selecting preset position number 0 will 
move the camera to home position.

Step 4

Click the [Call] button. 
 →  The camera direction will move to the preset posi-

tion corresponding to the selected preset position 
number. 

Note:

 •  A non-registered preset number can be selected,

but the camera will not move even if the [Call] but-
ton is clicked.