50

51

Register home position

The home position is set with the camera positioned at an already registered preset position. 

Step 1

Register the camera preset positions on the "Camera 
control [Advanced]" panel. (☞ Page 46)

Step 2

Click the [Setup] button. 
 →  The camera setup window will be displayed.  

(☞ Page 47)

Step 3

Click the [

D]/[C] button in the [Position] box to select 

a preset number to register as the home position. 
Select a preset number (1 - 256) to register. 

Step 4

Click the [Regist] button. 
 →  The selected preset number will be registered as 

the home position. 

Step 5

Click the [Back] button. 
 →  The camera setup window closes, and the display 

returns to the "Camera control [Advanced]" panel. 

Execute auto back focus

The auto back focus function starts to automatically adjust back focus based on a subject located in the center 
of the screen by clicking the execute button. For further information about this function, refer to the operating 
instructions of the camera in use. 

Step 1

When displaying the images on a 4-screen, select the 
desired cameras. 

Step 2

Display the "Camera control [Advanced]" panel (☞ 
page 46), and click the [Setup] button. 
 →  The camera setup window (☞ page 47) will be dis-

played. 

Step 3

Click the [Execute] button next to "Execute auto back 
focus function.". 

Step 4

Click the [Back] button. 
 →  The camera setup window closes, and the display 

returns to the "Camera control [Advanced]" panel.