68

69

[Camera]
Searches for images recorded using the selected 
camera. Mark the checkbox corresponding to the 
desired camera. When the checkbox for [All] is 
marked, the checkboxes of all cameras can be 
marked.

Step 3

Click the [OK] button. 
 →  [Filtering] appears in the status display area, and 

the filtered result will be displayed in the list dis-
play area.

[Total]
Displays the total number of searched data. When 
more than 10000 data matched, the ">10000" indica-
tion will be displayed. 

[All list] button
Cancels filtering and displays all recording events. 

[Refresh] button
Updates the list to the latest one. 
     

Step 1

Click the [Control] button on the top page (☞ page 
58) of the operation window, and click the [REC 
event] button in the [Search] box. 
 →  The recording event search window will be dis-

played. 

Step 2

Specify the search conditions (filters). 

[Date & time range]
Select a time range by designating a start and end 
time and date. The designated time range will be 
searched.

[REC event]
Searches for images recorded by the selected record-
ing mode only. Check the checkbox corresponding to 
the desired event type. When the checkbox for [All] is 
marked, the checkboxes of all of the following events 
can be marked:

Schedule [SCH]: Recording by the schedule 

recording event

Terminal alarm [TRM]: Recording triggered by a 

terminal alarm

Command alarm [COM]: Recording triggered by a 

command alarm

Camera site alarm [CAM]: Recording triggered by 

camera site alarm

Search and play recording events (REC event search)

Search the recording event list for a recording event and play it back. 

Important:

 •  To use recording event search, "HDD" must be selected for [Disk/Medium].
    It is also possible to filter recording events using the search filters. 
 •  Face matching alarm cannot be played back by recording event search on the web browser. Start playback

from the alarm log list. (☞ Page 59)