2

C69SFA  SEQUOIA SWING     C695050D (080610)

Field of application

1

Arborist harness with rigid seat 

conforming to the EN 813: 2008 

standard (seat harnesses) 

including EN 358: 2000 lateral 

attachment points (Work 

positioning and Travel restraint).

This product must not be loaded 

beyond its strength rating, nor be 

used for any purpose other than 

that for which it is designed.

WARNING

Activities involving the use of 

this equipment are inherently 

dangerous. 

You are responsible for your own 

actions and decisions.

Before using this equipment, you 

must: 

- Read and understand all 

instructions for use. 

- Get specific training in its proper 

use. 

- Become acquainted with its 

capabilities and limitations. 

- Understand and accept the risks 

involved.

Failure to heed any of these 

warnings may result in severe 

injury or death.

Responsibility

WARNING, specific training in the 

activities defined in the field of 

application is essential before use. 

This product must only be used 

by competent and responsible 

persons, or those placed under 

the direct and visual control of a 

competent and responsible person. 

Gaining an adequate apprenticeship 

in appropriate techniques and 

methods of protection is your own 

responsibility. 

You personally assume all risks 

and responsibilities for all damage, 

injury or death which may occur 

during or following incorrect use 

of our products in any manner 

whatsoever. If you are not able, or 

not in a position to assume this 

responsibility or to take this risk, do 

not use this equipment.

Only the techniques 

shown in the diagrams 

that are not crossed out 

and/or do not display 

a skull and crossbones 

symbol are authorized. 

Check our Web site 

regularly to find the 

latest versions of these 

documents:  

www.petzl.com 

Contact PETZL if you 

have any doubt or 

difficulty understanding 

these documents.

2

Nomenclature of parts

(1) Belt, (2) Thigh straps, (3) FAST rapid buckles, (4) Rigid seat, (4bis) Seat width adjustment 

extensions (5) “D” lateral attachment points, (6) Attachment bridge, (7) Gated rings, (8) Bridge 

height adjustment straps, (9) Seat height adjustment straps, (9 bis) DoubleBack buckles, 

(10) Strap retainer, (11) Saw holder, (12) Equipment loops, (13) Adjustable elastics, (14) Tool 

holder retainer, (15) Marking label, (16) Rigid seat rapid adjustment system, (17) Lateral thigh 

padding.

Principal materials

Polyester, nylon, polyethylene, steel, aluminum alloy.

1

5

6

7

3

4

11

14

12

3

8

2

13

8
7

5

10

9 bis

9

6

4 bis

15

17

16

16