45
581-002_v01
Appliance elements
(Fig. A)
1
Mixer motor
2
Pusher button
3
Switch lever
4
Turbo button
5
Whisks or mixers sockets
6
Mixing adapter hole
7
Handle insert
8
Mixers: left/right with toothed bar
9
Whisks: left/right with toothed bar
10
Liquidising dics
11
Mixing attachment
12
Cup
13
Stand
14
Head
15
Grip knob
16
Fastening button
17
Rotating bowl
18
Blade
ZELMER mixers types
(Fig. B)
basic mixer equipment
additional equipment, which you can buy in shops
Device description
The mixer has 5 speed positions. The lever is used to
●
set up the particular rotation speed according to the
numbers:
0, 1, 2, 3, 4
, and
5
on pusher button, which
helps to remove (push out) the mixers or whisks from the
mixer motor part.
Additionally, the drive has
●
„turbo”
button which helps to
get the maximum rotation speed immediately, regardless
the speed set with the lever. Such buttons are placed
both on the right and left sides of the casing intended for
the convenience of both left and right-handed users. The
„turbo”
button is automatically blocked in
„0”
position.
There are 2 sockets (holes), for whisks or mixers
●
assembling, placed on the bottom of the motor part.
The insert handle, placed on the top of the motor part,
●
is made of the material increasing the comfort of holding
the mixer motor part.
On the back wall of the drive there is a fastening hole for
●
the mixing attachment. The hole is covered with a mobile
cover.
There is a clamp and a fastener in the lower part of motor
●
casing, for power cord winding around the motor casing.
Mixer start-up and position setting
(rotation speed)
(Fig. C)
1
Place the ON/OFF switch in the
„0”
position - the
leftmost position. Install the selected tool.
2
Plug in the appliance.
3
Switch on the appliance by sliding the switch to the right.
4
If you want to increase the rotation shift the lever in
position
„5”
direction, choose the desired rotation speed.
5
In order to increase the rotation immediately, regardless
set speed, press and hold one of
„turbo”
buttons (on the
right or left side of the casing).
6
When you want to return to the previously selected
speed release
„turbo”
button.
Preparing for operations
OPERATION WITH WHISKS OR MIXERS (Fig. D)
The whisks are intended to whipping eggs white foam,
●
cream, rubbing yolks with sugar, cream and pancakes or
omelettes dough preparation.
The mixers are intended to work the rubbed dough, yeast
●
dough, cheeses cakes, imbirbread cakes, etc.
The whisks and mixers shall be assembled in sockets on
●
the bottom of the robot.
1
Press until you feel the refusal – when the clamps get
fastened.
When assembled improperly, the parts fall apart
during operation.
2
Insert the mixer or whisk with toothed bar into the socket
marked with a star.
The reverse assembling of the mixers can
cause lifting up the dough (taking the dough
out of bowl).
The level of products inside the bowl should
not exceed the hight of mixers or whisks
working part (L).
OPERATION WITH LIQUIDISING DISC (Fig. E)
Liquidizing disc is used for liquidizing boiled fruit and
●
vegetables such as: carrots, potatoes, tomatoes, apples
through the sieve. It partly replaces the function of the
mixing adapter.
1
Insert the liquidizing disc on the whisk with toothed bar
from the bottom side.
2
Insert the whisk into the socket marked with a star.
1 cm
L
1 cm
L
