GB
27
Assistance
Warning:
The appliance is fitted with an automatic diagnostic
system which detects any malfunctions. Malfunctions
are displayed by messages of the following type: “F”
followed by numbers.
Call for technical assistance in the event of a
malfunction.
!
Never use the services of an unauthorised
technician.
Please have the following information to hand:
• The type of problem encountered.
• The appliance model (Mod.).
• The serial number (S/N).
The latter two pieces of information can be found on
the data plate located on the appliance.
Assembling the sliding rack kit
To assemble the sliding racks:
1. Remove the two
frames, lifting them
away from the spacers
A (
see figure).
2. Choose which shelf
to use with the sliding
rack. Paying attention to
the direction in which
the sliding rack is to be
extracted, position joint
B and then joint C on
the frame.
3. Secure the two frames
with the guide rails using
the holes provided on
the oven walls (
see
diagram). The holes for
the left frame are
situated at the top, while
the holes for the right
frame are at the bottom.
4. Finally, fit the frames on the spacers A.
!
Do not place the sliding racks in position 5.
B
C
L
eft
gu
i
de
ra
il
Ri
ght
gu
i
de
ra
il
Di
rect
i
on
of
e
x
tract
i
on
D
A