For models equipped with a key iock;

Activating the Demo mode/Key lock

The Demo mode is conditionally applicable as key lock. If it 

is activated, the relays remain open all the time. Thus timer 

can be operated as usual but the connected appliance or 

appliance module remains unaffected. This means that your 

child can select the cook program but the program will not 

be activated and thus the connected appliance or appliance 

module will not be switched on.

To activate the demo mode/key lock;

1.  Make sure that the clock is in manual mode and cancel 

any active programs.

2.  Hold the " 

T"

 button and the " S" button down 

simultaneously for approx. 8 seconds. The display will read 

"ON".

3.  Press the “+” button.

The display reads 

“OFF” 

and the "f" symbol appears.

After approx. 5 seconds the time reappears next to the " f " 

symbol. The key lock is not activated.

To deactivate the demo mode/key iock;

1.  Make sure that the clock is in manual mode and cancel 

any active programs.

2.  Hold the " a"" button and the "o" button down 

simultaneously for approx. 8 seconds. The display will read 

“OFF"

3.  Press the “+” button.

The display reads 

“ON” 

and the " f" symbol disappears. 

After approx. 5 seconds the time reappears on the display. 

The key lock is now deactivated.

If the clock does not switch into manual mode or the 

oven does not start;

Auto-program in the clock memory may be reset. Hold button 

"o" pressed and press " +" increase the cooking time a little 

bit and then set the cooking time to zero by pressing Then, 

the oven can be started by pressing the manual key "v!l>".

Use of the minute minder

If your cooker has a minute minder;

There  is  an  electrical  ringer  timer  which  can  adjust  the  cooking 

period  to  maximum  100  min.  It  operates  by  turning  the  switch 

clockwise and can be adjusted by a knob.

Turn the knob to the manual position (v!!!/) if not want to use 

minute minder facility. In this position, the timer does not cut 

off the electricity flowever, in order to turn off the operating you 

either have to reset the timer or position the thermostate knob 

to 

“

0

”.

When  the  timer  is  set  between  0-100  min,  the  electricity  is  cut 

off  automatically  and  the  timer  rings  at  the  end  of  this  specific 

period.

Warning; The heating elements does not work unless the 
timer and thermostate knobs are opened together.

15