BenQ DC 5530 User’s Manual
Preparing Your DC E40 for Use
6
Eng
lish
2.2
Using an AC Power Adapter
The BenQ DC E40 comes with an AC power adapter
that both powers the camera and recharges the
battery. Connect the power adapter to the DC E40 as
shown below.
1.
Turn the camera off.
2.
Connect the included USB converter to the power
adapter connector
.
3.
Plug the power adapter into a power outlet
.
4.
Connect the USB adapter to the USB port at the
back of the camera
.
2.3
Charging the Battery
1.
Turn the camera off.
2.
Insert the battery as described on page 5.
3.
Connect the AC power adapter as described in the section above, or connect the included
USB cable to a computer USB port as described in “Transferring Files To/From a
Computer” on page 50.
Note
•
Use only the AC power adapter specified for the
camera. Damage caused by the use of an incor-
rect adapter is not covered under the warranty.
•
Dual Charging Mode allows you to charge the
battery when transferring files to or from a com-
puter through the included USB cable.
OP
EN
Connect the USB converter to the
power adapter connector.
Plug the power adapter
into a power outlet.
Connect the USB adapter
to the USB port.
A
B
C
A
B
C
