23

  Using the projector and remote control

Eng
lish

PIP --- 

POP --- 

Turning the power off

Follow the steps below.

1.

Press the POWER button on the projector or remote control. A 
confirmation message appears. To turn the projector off, press POWER 
again.

2.

The Power indicator light flashes green and the fans run for about two 
minutes to cool the lamp. The projector will not respond to any 
commands until the cooling process is complete.

3.

Then, the Power indicator light is a steady orange once the cooling 
process has finished and fans stop.

4.

If the projector will not be used for an extended period, turn the main 
power switch off and unplug the power cable from the power outlet.

Sub-window

Main window

Right window

Left window

If You Want To Shut Down The Projector, 

Press The Power Key Again 

To Perform The Shut Down Process.