25
Menus
Eng
lish
Using the menus
The projector is equipped with on-screen display (OSD) menus for making
various adjustments and settings.
There are eight different menu languages. Refer to Setup Menu on page
for
more details.
The following example describes the adjustment of the keystone.
Picture menu
The Picture menu allows you to adjust the finer details of the projected image quality. Before making
adjustments, you are suggested to choose a desired preset mode in this menu which has set some certain values
in order to meet different lighting environment and presentation purposes.
1.
Brightness: Adjusts the brightness of the
image. The higher the value, the brighter the
image. And lower the value, the darker the
image. Adjust this control so the black areas of
the image appear as black and that detail in
the dark areas is visible.
2.
Contrast: Adjusts the degree of difference
between dark and light in the image. The
higher the value, the greater the contrast.
3.
Color: Increases or decreases the color
intensity of the image. The higher the value,
the more vivid and brighter the color.
4.
Tint: Adjusts the color tones of the image. The higher the value, the more greenish the picture becomes.
The lower the value, the more purplish the picture becomes.
5.
Noise Reduce: Reduces electrical image noise. The higher the setting, the less the noise.
1.
Press the MENU/EXIT button to turn the on-
screen menu on.
2.
Use
e
or
f
to select Setup and press SOURCE/
ENTER.
3.
Use
c
or
d
to select Keystone.
4.
Adjust keystone values by pressing
e
or
f
.
5.
Press the MENU/EXIT button twice* to
leave and save the settings.
*The first press leads you back to the submenu
and the second press closes the on-screen menu.
50
-30
+70
-30
50
+70
