![background image](/i/dell/157685/dell-5330dn/h/dell-5330dn-021.png)
PCL
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and font size.
PostScript
This menu provides you with the Print PS Error menu item.
Accessing Operator Panel Menus
1.
Press
Menu
(
).
2.
Press
Scroll
(
to
) to highlight the desired setting and press
Select
(
).
3.
If the setting item has sub menus, repeat step 2.
4.
Press
Scroll
(
to
) to access the required value.
5.
Press
Select
(
) to save the selection.
6.
If you want to move to the upper level menus, press
Select
(
).
7.
Press
Cancel
(
) to return to Standby mode.
Menu selection:
Purpose:
Values:
PCL
Sets the PCL emulation
configuration: font type, symbol
type, lines per page, and font
size.
Typeface
PCL1 ~ PCL56
Select the standard font to be
used in PCL emulation.
l
PCL1~PCL7's interval
between letters is fixed,
and PCL8~PCL45's interval
is proportional to the font
type and font size. Adjust
the font size of PCL1~PCL7
using the Pitch item, and
PCL8~PCL45 using the
Point Size item.
l
PCL46~PCL56's interval
and font size are fixed.
Symbol
ROMAN8 ~ OCR B
Selects the symbol set to be used
in PCL emulation. The symbol set
is the group of numbers, marks,
and special signs used when
printing letters. Available symbol
sets vary depending on the
Typeface setting.
Point Size
4.00 ~ 999.75
(0.25 unit)
By selecting between PCL8 and
PCL45 from the Typeface menu,
you can determine the font size
by setting the height of the
characters in the font.
Courier
Regular, Dark
Select the version of Courier font
to use.
Pitch
0.44 ~ 99.99
(0.01 unit)
By selecting between PCL1 and
PCL7 from the Typeface menu,
you can determine the font size
by setting the number of
characters that will print in one
horizontal inch of type. The
default value 10 is the best size.
Lines
5 ~ 128
Set vertical spacing from 5 to 128
lines for the default paper size.
The default number of lines may
differ according to the paper size
and printing orientation.
Menu selection:
Purpose:
Values:
PostScript
Provides the Print PS Error
menu items.
Print PS Error
On
Off
Select whether or not your
printer prints an error list when a
PS error occurs.
l
On
: Prints PS 3 emulation
errors. If an error occurs,
the job stops processing,
the error message prints,
and the printer flushes the
job.
l
Off
: The job is flushed
without an indication of
any error.