![background image](/i/dell/157685/dell-5330dn/h/dell-5330dn-058.png)
5.
Push the DIMM into the printer until it snaps into place. Ensure that the latches fit over the notches located on either side of the DIMM.
6.
Close the control board cover by aligning the groove on it with the notch on the printer and sliding it.
7.
Reconnect the power cord and printer cable, and turn the printer on.
Activating the added memory in the printer properties
After installing the memory DIMM, you need to select it in the printer properties of the printer driver so that you can use it:
Dell 5330dn Mono Laser Printer
1.
Click the Windows
Start
menu.
2.
For Windows NT 4.0/2000, select
Settings
and then
Printers
.
For Windows XP/2003, select
Printers and Faxes
.
For Windows Vista, select
Control Panel
Hardware and Sound
Printers.
3.
Select the
Dell 5330dn Mono Laser Printer
.
4.
Right-click the printer icon and select Properties.
5.
Click the
Printer
tab and select
768
from the
Memory Size
drop-down list in the
Printer Memory
section.
6.
Click
OK
.
Dell 5330dn Mono Laser Printer PS
1.
Ensure the PostScript printer driver is installed on your computer. For details about installing the PS printer driver, see
"Installing Software in Windows"
.
2.
Click the Windows
Start
menu.
3.
For Windows 2000, select
Settings
and then
Printers
.
For Windows XP/2003, select
Printers and Faxes
.
For Windows Vista, select
Control Panel
Hardware and Sound
Printers.
4.
Select the
Dell 5330dn Mono Laser Printer PS
printer.