![background image](/i/dell/157685/dell-5330dn/h/dell-5330dn-077.png)
a.Short grain is preferred for papers over 135 g/m
2
.
Selecting an Output Location
The printer has two output locations: the
output tray
(face down) and the
rear door
(face up).
To use the
output tray
, ensure that the
rear door
is closed. To use the
rear door
, open it.
Printing to the Output Tray
Output bins available
The following table provides information on standard and optional output bin capability and connectivity.
(47 lb bond)
Dual-web paper
-
176 g/m
2
(47 lb bond)
Polyester
-
176 g/m
2
(47 lb bond)
Vinyl
-
176 g/m
2
(47 lb bond)
Integrated Forms
Pressure-sensitive area
(must enter the printer
first)
-
135-140 g/m
2
(36-40 lb bond)
Paper base (long grain)
-
75-135 g/m
2
(20-36 lb bond)
Envelopes 25% Cotton
Content Maximum
Weight- 24 lb
Sulfite, wood-free or up
to 25% cotton bonds
-
75-105 g/m
2
(20-28 lb)
NOTE:
If paper coming out of the
output tray
has problems, such as excessive curl,
try printing to the
rear door
.
NOTE:
To avoid paper jams, do not open or close the
rear door
while the printer is printing.
Output Bin Name
Capacity
Maximum Weight &
Media Type Supported
How Many Can Be
Installed on the Printer?
Rear output Tray
100 sheets of 75 g/m
2
paper
Plain paper 60-216 g/m
2
,
Label, Envelopes,
Cardstock,
Transparencies.
N/A - One is standard on
the printer and located at
the rear side.