![background image](/i/dell/157685/dell-5330dn/h/dell-5330dn-084.png)
To link the trays, load only the same size and type of print media in each tray. Set the paper size and type for each tray.
To disable tray linking, choose either a unique paper size/ type for each tray or use the operator panel, as follows:
1.
Press
Menu
(
).
2.
Press
Scroll
(
to
) to highlight
Paper Setup
and press
Select
(
).
3.
Press
Scroll
(
to
) to highlight
Tray Behavior
and press
Select
(
).
4.
Press
Scroll
(
to
) to highlight
Tray Linking
and press
Select
(
).
5.
Press
Scroll
(
to
) to
Off
to disable tray linking
and press
Select
(
).
6.
Press
Cancel
(
) to return to Standby mode.
Substitute Size
This setting is used to determine whether the printer can substitute another paper size when the requested paper size is not available in any of the input
trays. The Printer will substitute A4/Letter, A5/Statement, and B5/JIS B5. For example, if A4 is the requested paper size and there is no A4 paper in any of the
input source, then the printer will print on Letter size paper, if available.
When the substitute size is set to
Off
, it means no substitution is allowed for the requested paper size.
Configure MPF
Multi-purpose Feeder
can be configured to behave in
Tray mode
or in
Bypass
mode
by setting the
Configure MPF
menu in the operator Panel.
Bypass Mode
In this mode, the printer pulls the paper from the
Multi-purpose Feeder
first unless it is closed or empty. The
Multi-purpose Feeder
gets the highest priority
and pulls whatever material is in the
Multi-purpose Feeder
.
Tray Mode
In this mode, the
Multi-purpose Feeder
is treated as another papertray; the printer pulls paper from the tray that matches the size and type. First preference
goes to the default source.