11

Advanced Color Adjustments

Basi

c 

Im

a

g

e

 Qual

it

y Adj

u

s

tments

Brightness

Input signal

When 
adjusted to 
+ side

When 
adjusted to 
– side

Brightness

Input signal

When 
adjusted to 
– side

When 
adjusted to 
+ side

Color Temp.

You can adjust the overall tint of images.
If you select "High", images appear bluish, and if you select "Low", images appear reddish.
Select one of three levels: "High" (9300K), "Medium" (6500K) or "Low" (5500K).

Flesh Tone

This can be used to adjust the flesh tones for images of people.
The Epson Cinema Filter effect that is automatically applied to images when a "Color Mode" setting 
is made creates natural-looking flesh tones. If you would like to further enhance flesh tones, use this 
"Flesh Tone" setting to make the adjustment.
If set to the + side, the colours become greenish, and if set to the – side, the colours become reddish.

Gain adjustment

Gamma adjustment

The image brightness can be adjusted by adjusting the individual R (red), G (green) and B (blue) 
components of the dark areas (offset  ), bright areas (gain  ) and intermediate areas (gamma  ) 
respectively. Because such detailed adjustments are possible, images with greater depth can be 
obtained.

If you would like bright areas to appear 
more clearly, change the setting to the – 
side. If you change it to the + side, bright 
areas will become whiter, but the contrast 
will become poorer.

If the setting is changed to the – side, 
smoother images can be obtained. If the 
setting is changed to the + side, sharper 
images can be obtained.