2

Safety Information

1

Saf
et

y Inf

orma

tion

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK  

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol 
within an equilateral triangle is intended to 
alert the user to the presence of uninsulated 
dangerous voltage within the product’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the product.

FCC WARNING:

This equipment may generate or use 

radio frequency energy. Changes or modifications to this 
equipment may cause harmful interference unless the 
modifications are expressly approved in the instruction 
manual. The user could lose the authority to operate this 
equipment if an unauthorized change or modification is 
made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be 
required to correct the interference at his own expense.
•  A suitable conduit entries, knock-outs or glands shall 

be provided in the cable entries of this product in the 
end user.

•  Caution: Danger of explosion if battery is incorrectly 

replaced. Replaced only with the same or equivalent 
type recommended by the manufacturer. Dispose 
of used batteries according to the manufacturer’s 
instructions.

•  Holes in metal, through which insulated wires pass, 

shall have smooth well rounded surfaces or shall be 
provided with brushings.

This Class A digital apparatus complies with Canadian 
ICES-003.
Cet appareil numérique de la classe A est conforme à la 
norme NMB-003 du Canada.