8
Preparation
2
P
repar
ation
Introduction
The LG Network Camera is designed to use on an Ethernet
network and must be assigned an IP address to make it
accessible.
This manual contains instructions on how to install and
manage the LG Network Camera in your networking
environment. Some knowledge of networking
environments would be beneficial to the reader.
Should you require any technical assistance, please contact
authorized service center.
Features
•
High Sensitivity Support
The camera provides the high quality picture with
4.5 mm EX-view HAD CCD.
•
Preset Position
Preset position is the function to register camera
monitoring positions (preset positions). Maximum
128 Preset Positions are available. By entering the
position numbers, you can move cameras to the preset
positions. The moving speed and holding time are
adjustable.
•
Preset Tour
Preset Tour is the function to go through all the
registered camera monitoring positions (preset
positions). During the working PRESET TOUR, The
FOCUS could not be operated properly under -10 °C
(for LW9226(I) series only)
•
Group Tour
Maximum 9 group tours are able to compose the
group of preset, pattern, auto pan that the operator
can program to be linked together in a sequence.
•
Pattern recording function
A routine of manual operations can be stored and
reproduced repeatedly. The Pan, Tilt and Zoom controls
are available for pattern recording.
NOTE
The available total time of pattern differs depending
on camera’s operation. When the pattern recording
is full, the pattern recording will automatically stop.
•
Privacy Mask
Privacy zone feature enables users to veil unwanted
zones. This setting is used for masking unwanted zones,
hiding them from display on the monitor screen. Up to
8 zones can be registered.
•
Auto Pan
The camera has an Auto Pan function that enables to
keep surveillance on every detail occurring around the
specific area, which is preset to watch in advance. The
camera can pan among the maximum 8 points you will
set. The moving speed and holding time are adjustable.
•
Auto Flip
When the camera is operated to tilt through the 90°, it
can be watched the opposite side of the locations by
Auto Flip of a 180° horizontally.
•
Optical Zoom
-
LW9228(I) series: The optical zoom range is 1x to
37x.
-
LW9226(I) series: The optical zoom range is 1x to
27x.
•
Digital Zoom
Digital zoom enhances the systems zoom range to 12
times beyond the optical zoom limit.
Total system zoom range is below.
-
LW9228(I) series: 37x (1x digital zoom) to 444x (12x
digital zoom)
2
Preparation
