38

Operation and settings

4

Oper

ation and se

ttings

IP list

 › Basic policy: Select the basic policy type. 

 - Allow all: Allow all the IP address basically, but 

the IP addresses in the list are denied.

 - Deny all: Deny all the IP address basically, but 

the IP addresses in the list are allowed. It needs 
at least one IP address to activate this function.

•  Save: Click this button to confirm the settings.
•  Add: Click this button to add the IP address.

1.   Click the [Add] button. 
2.   Set the IP options.

 - Alias: Enter the alias.
 - From: Enter the start IP address for the IP 

filtering. 

 - To: Enter the end IP address for the IP filtering. 

  NOTE

If you want to deny or to allow a range of IP 
addresses, enter the start IP address to “From” 
and the end IP address to “To”. You can also add 
an IP address by entering the same IP address to 
“From” and “To”.

3.   Click the [Save] button.
4.   Repeat the steps 1 to 3 to add additional IP 

address.

•  Remove: Click this button to delete the IP address.

1.  Select the alias from the list.
2.  Click the [Remove] button. The IP address will be 

deleted.

User settings

Basic

The IP device is shipped with the login rights of 
administrator only. If others need to access the IP device 
excluding the configuration a login with viewer rights need 
to be created. A maximum of 50 users can be created. 

User list

 › Add the User

You can register a new user with various access 
rights.
1.  Click the [Add] button. User setting dialog is 

displayed.

2.   Enter the new User ID and Password. (Should 

have a minimum of 4 characters and preferably 
a combination of alphanumeric).

3.   To confirm the password, retype the password 

that you typed in the Password box.

4.   Select the authority from the drop down list 

to provide the access rights to each user and 
then click the [Save] to confirm your selection.

 - Administrator: Allows you to operate setup 

menus and to view live images.

 - Power user: Use of the limited functions 

of the system (The Configuration menu is 
not allowed). A power user can use the Live 
View, OSD control and audio functions. 

 - Normal user: Provides the lowest level of 

access, Allows to view live images only.