Инструкция для ZYXEL GS1920-48

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 18 Port Authentication

GS1920 Series User’s Guide

149

Host-mode

Specify how the Switch authenticates users when more than one user connect to the port
(using a hub).

Select Multi-Host to authenticate only the first user that connects to this port. If the first
user enters the correct credential, any other users are allowed to access the port without
authentication. If the first user fails to enter the correct credential, they are all put in the
guest VLAN. Once the first user who did authentication logs out or disconnects from the
port, rest of the users are blocked until a user does the authentication process again.

Select Multi-Secure to authenticate each user that connects to this port.

Multi-Secure
Num

If you set Host-mode to Multi-Secure, specify the maximum number of users that the
Switch will authenticate on this port.

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 61

Advanced Application > Port Authentication > 802.1x > Guest VLAN (continued)

LABEL

DESCRIPTION