Chapter 6 Tutorials
GS1920 Series User’s Guide
51
5
Click Apply to save your changes back to the run-time memory.
Figure 41
Tutorial: Set DHCP Server and Relay Information
6
Click the Save link in the upper right corner of the web configurator to save your configuration
permanently.
7
The DHCP server can then assign a specific IP address based on the DHCP request.
6.3.4
Troubleshooting
Check the client A’s IP address. If it did not receive the IP address 172.16.1.18, make sure:
1
Client A is connected to the Switch’s port 2 in VLAN 102.
2
You configured the correct VLAN ID, port number and system name for DHCP relay on both the
DHCP server and the Switch.
3
You clicked the Save link on the Switch to have your settings take effect.