Chapter 9 VLAN
GS1920 Series User’s Guide
92
9.5
Configure
VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port.
Click the VLAN Port Setup link in the VLAN Status screen.
Figure 71
Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup
The following table describes the labels in this screen.
Clear
Click Clear to start configuring the screen again.
VID
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
Active
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
Name
This field displays the descriptive name for this VLAN group.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.
Table 32
Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (continued)
LABEL
DESCRIPTION
Table 33
Advanced Application > VLAN > VLAN Configuration > VLAN Port Set
up
LABEL
DESCRIPTION
GVRP
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to permit VLAN groups beyond the local Switch.
Port
This field displays the port number.