25
P
rep
ara
tio
n
s
Preparing the Lens
Refer also to the instruction manual of the lens.
Mounting the Lens
1. Set the
dial to OFF.
2. Remove the dust caps from the camcorder
and the lens.
3. Align the red mark on the lens with the red
mark on the camcorder and turn the lens
clockwise until it clicks.
Removing the Lens
1. Set the
dial to OFF.
2. Slide the LENS RELEASE switch all the way
in the direction of the arrow.
3. Turn the lens counter-clockwise until it
stops and remove the lens.
4. Attach the dust caps to the camcorder and
the lens.
Be careful not to drop the lens or camcorder when mounting or removing the lens.
Avoid direct sunlight or strong light sources when mounting or removing the lens.
The XL mount is not compatible with the VL mount.
If you set the
dial to a recording mode without a lens attached, the lens warning icon
“LENS” will flash in red on the screen.
Do not touch the lens, lens mount and the interior of the mount, or expose them to dust or dirt.
If necessary, clean the lens with a dry, soft lens-cleaning cloth. Make sure to turn off the
camcorder while cleaning the lens.
Proper operation cannot be guaranteed when recording in HDV standard with lenses that were not
designed for HDV recording. If you attach such a lens to the camcorder, the messages “THIS
LENS HAS NO STILL SHOOTING CAPABILITY” and “HD INCOMPATIBLE LENS” will appear.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
