![background image](/i/dell/152829/dell-c2660dn/h/dell-c2660dn-142.png)
140
Dell™ Printer Configuration Web Tool
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from
Reset Defaults
in the
Printer Settings
menu.
Values:
Security
The
Security
tab includes
Set Password
,
SSL/TLS
,
IPsec
,
802.1x
,
and IP Filter (IPv4)
.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the
Dell Printer
Configuration Web Tool
. This page can also be displayed by clicking
Set Password
in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Admin Settings
from Panel Lock in Printer Settings.
Values:
SSL/TLS
Purpose:
To specify the settings for the SSL encryption communication to the printer, and set/delete the certificate used for
IPsec, or Wireless LAN.
Values:
Initialize NIC NVRAM Memory
and restart printer.
Click
Start
to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Restart Printer
Click
Start
to reboot the printer.
Administrator Password
Sets the password using up to 128 alphanumeric characters (excluding spaces and
colons). If more than 128 alphanumeric characters are specified, only the first 128
alphanumeric characters will be valid.
Re-enter Administrator Password
Confirms the set password.
Access denial by the authentication
failure of the Administrator
Sets the amount of time the administrator should wait for the access to the printer
setup from
Dell Printer Configuration Web Tool
. Sets the time period from 5 to 255
seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode
is disabled.
HTTP-SSL/TLS
Communication
*1
Select the check box to enable the HTTP-SSL/TLS Communication.
HTTP-SSL/TLS
Communication Port
Number
Sets the port number, which is not identical with that of HTTP for SSL/TLS. This must be 443 or
between 8000 and 9999.
SMTP-SSL/TLS
Communication
Sets the type of SSL/TLS used to communicate with the SMTP server.
Generate Self-Signed
Certificate
*2
Click to display the
Generate Self-Signed Certificate
page and to create a security certification from
the page. The Generate Self-Signed Certificate button is available only when the self-signed
certificate is not generated.
Public Key Method
Select the public key method of the self-signed certificate.