![background image](/i/dell/152829/dell-c2660dn/h/dell-c2660dn-156.png)
154
Understanding the Tool Box Menus
Maintenance
CAUTION:
Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Purpose:
To configure the paper density, the color registration adjustments, the initialization of the printer, and other
settings.
Values:
Apply New Settings
After you change the settings, click this button to apply
the changes.
Restart printer to apply new settings
Click this button to apply the changes.
*1
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This uses much less energy,
but requires more warm-up time for the printer. Specify 1 minute if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum
warm-up time.
Select a value between 1 and 30 minutes for the power saver mode if you want a balance between energy consumption and a shorter
warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer. You can
also return the printer to the standby mode by pressing the
(Power Saver) button on the operator panel.
*2
Power Off Timer feature is available only in certain regions.
*3
This item is available only when the optional 550-sheet feeder is installed.
Paper Density
Plain
Light
Sets plain paper density.
Normal
Label
Light
Sets label paper density.
Normal
Color
Registration
Adjustments
Auto Correct
Click
Start
to perform color registration
automatically.
Print Color Regi Chart
Click
Start
to print a color registration chart.
Registration
Adjustments
LY(Left Yellow) Available Range:
-9
to
+9
Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction) color
adjustment values that are found in the color
registration chart individually for Yellow, Magenta,
and Cyan.
LM(Left
Magenta)
Available Range:
-9
to
+9
LC(Left Cyan)
Available Range:
-9
to
+9
RY(Right
Yellow)
Available Range:
-9
to
+9
RM(Right
Magenta)
Available Range:
-9
to
+9
RC(Right Cyan) Available Range:
-9
to
+9
PY(Process
Yellow)
Available Range:
-9
to
+9
PM(Process
Magenta)
Available Range:
-9
to
+9
PC(Process
Cyan)
Available Range:
-9
to
+9