![background image](/i/dell/152829/dell-c2660dn/h/dell-c2660dn-181.png)
Understanding the Printer Menus
179
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer. You can also change the status of the printer to the standby mode by pressing any button on the operator
panel.
If the Power Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify
any settings for the specified time.
Values:
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is
cancelled if the time-out time is exceeded.
Values:
Date & Time
Purpose:
To specify the date and time formats.
Values:
45sec
*
1min
2min
3min
4min
Off
Disables the fault time-out.
On
*
60 seconds
*
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Available Range:
3-300 seconds
Set Date & Time
Time Zone
Sets the time zone.
Date
Sets the date depending on the
Date Format
settings.
Time
Sets the time.
Date Format
Sets the date format.
Time Format
12H
Sets the time in 12-hour format.
24H
*
Sets the time in 24-hour format.