![background image](/i/dell/152829/dell-c2660dn/h/dell-c2660dn-179.png)
Understanding the Printer Menus
177
PS Data Format
Purpose:
To specify PostScript Level3 Compatible communication protocol for a parallel interface, you can configure the
PS
Data Format
settings for the wired network. The change becomes effective after the printer is turned off and then
on again.
Values:
USB Settings
Use the
USB Settings
menu to change printer settings affecting a USB port.
USB Port
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on
again.
Values:
PS Data Format
Purpose:
To specify PostScript Level3 Compatible communication protocol for a parallel interface, you can configure the
PS
Data Format
settings for the wired network. The change becomes effective after the printer is turned off and then
on again.
Values:
Auto
Used when auto-detecting the PostScript Level3 Compatible communication protocol.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP
*
Used when the communication protocol supports both ASCII and binary data to switch between them
according to the specified control code.
Binary
Used when no special processing is required for data.
Disable
Disables the USB interface.
Enable
*
Enables the USB interface.
Auto
Used when auto-detecting the PostScript Level3 Compatible communication protocol.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP
*
Used when the communication protocol supports both ASCII and binary data to switch
between them according to the specified control code.
Binary
Used when no special processing is required for data.