20
Configuration Menu Functions
This turns the trigger function on and off to determine whether the projector's power on/
off status and problems with projector operation are communicated to an external
device.
If you change the setting, the new setting will take effect after the power has been turned
off and the cool-down period is complete.
OFF
This lets you turn the settings for the various lock functions on and off. When a lock
function is on, a
icon appears on the screen when a button is pressed.
•
Focus Lock:
When set to ON, focus adjustment is disabled.
OFF
•
Zoom Lock :
When set to ON, zoom adjustment is disabled.
OFF
•
Child Lock :
This locks the power on function of the
button on the projector's
control panel, so that a child cannot accidentally turn the projector's power on and
look into the projector's lens.
When the lock is applied, the power will only turn on if
is pressed down for about
3 seconds.
can be used to turn off the power, and the remote control will continue
to operate as normal.
The remote control operation is unaffected by this setting.
If you change the setting, the new setting will take effect after the power has been
turned off and the cool-down period is complete.
OFF
•
Key Lock :
If this is set to "ON", you can't operate the projector's control panel
buttons.
(If this is set to "ON", the "Child Lock" setting cannot be made.)
If you change the setting, the new setting will take effect after the configuration menu
is disappears.
OFF
Vertical stripes may appear in the projected images. If these vertical stripes interfere
with viewing of images, make this adjustment.
Press
,
,
and
to specify the position for the configuration menus to be
displayed.
Center
This sets whether the navigation bar for the configuration menus is displayed (ON) or
not displayed (OFF).
ON
The colour for the main configuration menu (full menu) and the navigation bar can be
selected as follows.
•
Color 1:
Blue
•
Color 2:
Green
•
Color 3:Red
Color 1
This sets whether the following message displays appear (ON) or don't appear (OFF).
•
Image signal, colour mode , aspect and item name when memory settings are
retrieved
•
Messages such as when no image signals are being input, when an incompatible
signal is input, and when the internal temperature rises
ON
Selects the screen status when a blank screen or the start-up screen (the image that is
projected when projection starts) is being projected.
Black
Trigger Out
Lock Setting
LCD Panel Adjustment
Default setting
On-Screen Display
Menu Position
Navigation Bar
Menu Color
Message
Background Color
