Инструкция для INFINITI FX35 (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (133,1)

Model "S51-D" EDITED: 2008/ 3/ 26

SIC2925

When the switch is in the DOOR position

, the light illuminates while the lift gate

is opened. When the lift gate is closed, the
light will turn off.

When the switch is in the OFF position

the light will turn off.

The light will turn off after 30 minutes
when the lights remain illuminated to
prevent the battery from becoming dis-
charged.

HomeLink

Universal Transceiver provides

a convenient way to consolidate the func-
tions of up to three individual hand-held
transmitters into one built-in device.

HomeLink

Universal Transceiver:

Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.

Is powered by your vehicle

’

s battery.

No separate batteries are required. If
the vehicle

’

s battery is discharged or is

disconnected, HomeLink

will retain all

programming.

Once HomeLink

Universal Transceiver is

programmed, retain the original transmit-
ter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink

Universal Transceiver buttons

should be erased for security purposes.
For additional information, see

“

PRO-

GRAMMING HomeLink

”

later in this sec-

tion.

WARNING

Do not use HomeLink

Universal Trans-

ceiver with any garage door opener that
lacks safety stop and reverse features as

required by federal safety standards.
(These standards became effective for
opener models manufactured after April
1, 1982.) A garage door opener which
cannot detect an object in the path of a
closing garage door and then automati-
cally stop and reverse, does not meet
current federal safety standards. Using
a garage door opener without these
features increases the risk of serious
injury or death.

During programming procedure, your
garage door or security gate may open
or close. Make sure that people and
objects are clear of the garage door,
gate, etc. that you are programming.

Your vehicle

’

s engine should be turned

off while programming HomeLink

Uni-

versal Transceiver.

PROGRAMMING HomeLink

To program your HomeLink

Transceiver to

operate a garage door, gate, or entry door
opener, home or office lighting, you need
to be at the same location as the device.
Note: Garage door openers (manufactured
after 1996) have

“

rolling code protection

”

To program a garage door opener equipped
with

“

rolling code protection

”

; you will

CARGO LIGHT

HomeLink

UNIVERSAL TRANSCEIVER

Instruments and controls