Инструкция для INFINITI FX35 (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (164,1)

Model "S51-D" EDITED: 2008/ 3/ 26

under the following conditions:

The ignition switch is in the ON posi-
tion.

The selector lever is in the P (Park)
position.

If the outside mirrors or the steering wheel
reaches its maximum adjustment, the
function is automatically disabled. Restart
the function by selecting a previously
stored seat memory position using the
memory switches (1 or 2). An Intelligent
Key that was previously linked to the
stored seat memory can also be used to
restart the function.

If a seat position was not previously stored
in the seat memory, restart the function by
adjusting the steering wheel and outside
mirrors manually for your best driving
position and then drive the vehicle above
4 MPH (7 km/h).

Cancel or activate seat synchroni-
zation function

The selector lever must be in the P (Park)
position with the ignition switch in the ACC
position.

The seat synchronization function can be
activated or canceled by pushing and
holding the SET switch for more than 10

seconds while the ignition switch is in the
ACC position.

The indicator lights on the memory
switches (1 and 2) will blink once when
the function is canceled, and the indicator
lights will blink twice when the function is
activated. Note that the indicator lights
may illuminate after 5 seconds while
holding the SET switch. This indicates
readiness for linking the Intelligent Key to
a stored memory position. Keep the SET
switch pushed for more than 10 seconds to
turn on or off the seat synchronization
function.

MEMORY STORAGE

Two positions for the driver

’

s seat, steering

column and outside mirrors can be stored
in the automatic drive positioner memory.
Follow these procedures to use the mem-
ory system.

1. Move the selector lever to the P (Park)

position.

2. Push the ignition switch to the ON

position.

3. Adjust the driver

’

s seat, steering col-