Инструкция для INFINITI FX35 (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (333,1)

Model "S51-D" EDITED: 2008/ 3/ 26

SSD0738

VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE OPERATION

Always pay attention to the operation of
the vehicle and be ready to manually
control the proper following distance. The
vehicle-to-vehicle distance control mode of
the Intelligent Cruise Control (ICC) system
may not be able to maintain the selected
distance between vehicles (following dis-
tance) or selected vehicle speed under
some circumstances.

The vehicle-to-vehicle distance control
mode uses a sensor

located on the

front of the vehicle to detect vehicles
traveling ahead. The sensor generally

detects the signals returned from the
reflectors on a vehicle ahead. Therefore, if
the sensor cannot detect the reflector on
the vehicle ahead, the ICC system may not
maintain the selected distance.

The following are some conditions in which
the sensor cannot detect the signals:

When the reflector of the vehicle ahead
is positioned high on the vehicle
(trailer, etc.)

When the reflector on the vehicle ahead
is missing, damaged or covered

When the reflector of the vehicle ahead
is covered with dirt, snow and road
spray

When the snow or road spray from
traveling vehicles reduces the sensor

’

visibility

When dense exhaust or other smoke
(black smoke) from vehicles reduces
the sensor

’

s visibility

When excessively heavy baggage is
loaded in the rear seat or the luggage
room of your vehicle

The ICC system is designed to automati-
cally check the sensor

’

s operation within

the limitation of the system. When the
sensor is covered with dirt or is obstructed,

the system will automatically be canceled.
If the sensor is covered with ice, a
transparent or translucent vinyl bag, etc.,
the ICC system may not detect them. In
these instances, the vehicle-to-vehicle dis-
tance control mode may not cancel and
may not be able to maintain the selected
following distance from the vehicle ahead.
Be sure to check and clean the sensor
regularly.

The vehicle-to-vehicle distance control
mode is designed to maintain a selected
distance and reduce the speed to match
the slower vehicle ahead. The system will
decelerate the vehicle as necessary and if
the vehicle ahead comes to a stop, the
vehicle decelerates to a standstill. How-
ever, the ICC system can only apply up to
25% of the vehicles total braking power.
This system should only be used when
traffic conditions allow vehicle speeds to
remain fairly constant or when vehicle
speeds change gradually. If a vehicle
moves into the traveling lane ahead or if
a vehicle traveling ahead rapidly decele-
rates, the distance between vehicles may
become closer because the ICC system
cannot decelerate the vehicle quickly en-
ough. If this occurs, the ICC system will
sound a warning chime and blink the
system display to notify the driver to take
necessary action.