![background image](/i/infiniti/155628/infiniti-fx35-2009/h/infiniti-fx35-2009-178.png)
Black plate (176,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SAA1450
Tire Pressure information
The tire pressure will be displayed for
reference.
The pressure indication
“
** psi
”
on the
screen means that the tire pressure is
being measured. After a few driving trips,
the pressure for each tire will be displayed.
In case of low tire pressure, LOW PRES-
SURE information will be displayed on the
screen. Check the pressure for all tires.
Tire pressure rises and falls depending on
the heat caused by the vehicle
’
s traveling
condition and the temperature.
After tire rotation is performed, tire pres-
sure will not be displayed in the actual tire
position. Drive the vehicle at over 25 MPH
(40 km/h) for approximately 10 minutes to
reset the display.
For additional information, see
“
Low tire
pressure warning light
”
in the
“
2. Instru-
ments and controls
”
section and
“
TIRE
PRESSURE MONITORING SYSTEM (TPMS)
”
in the
“
6. In case of emergency
”
section.
WARNING
.
When a spare tire is mounted or a wheel
is replaced, tire pressure will not be
indicated, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your INFINITI dealer as soon as
possible for tire replacement and/or
system resetting.
.
Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
SAA1554
Maintenance information
To set the maintenance interval for Remin-
ders 1 to 4, choose an item using the
INFINITI controller and push the
ENTER
button.
You can also set to display a message to
remind you that the maintenance needs to
be performed.
The following example shows how to set
Reminder 1. Use the same steps to set the
other maintenance information.
4-10
Monitor, climate, audio, phone and voice recognition systems