35

ENG

ENGLISH

CONTROLLING THE MULTIPLE PRODUCT

CONTROLLING THE MULTIPLE PRODUCT

y

Use this method to connect several products to a single PC. You can control several products at a 
time by connecting them to a single PC.

y

In the Option menu, Set ID must be between 1 and 99 without being duplicated.

Connecting the cable

Connect the RS-232C cable as shown in the picture.

y

The RS-232C protocol is used for communication between the PC and product. You can turn the 
product on/off, select an input source or adjust the OSD menu from your PC.

Communication Parameter

RS-232C Configurations

PC 

     Set

 D-Sub 9         D-Sub 9 

 (Female)         (Female)

PC 

     Set

 D-Sub 9         D-Sub 9 

 (Female)         (Female)

y

Baud Rate : 9600 BPS

y

Data Length : 8 bit

y

Parity Bit : None

y

Stop Bit : 1bit

y

Flow Control : None

y

Communication Code : ASCII code

y

Use a crossed (reverse) cable

7-Wire Configurations (Standard RS-232C cable)

3-Wire Configurations (Not Standard)

Monitor 1  

Monitor 2 

Monitor 3

Monitor 4

PC

RS-232C Cable 

(not included)