43
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
* Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
28. SW Version (Command: f z)
* Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
* The data value received is shown in hexadecimal.
29. Automatic Standby (Command: m n)
Enables the Automatic Standby function (the set
turns off after 4 hours).
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
