17 -
Dynamic Range Control
With this setting you can limit the dynamics (this means the
difference between the loudest and the quietest sounds). You can
therefore also play back a film with lower volume differences.
➠
Turn the volume down before changing this setting.
56
In the menu
SETTINGS
select the option
AUDIO VIDEO
SETTINGS
.
Confirm
OK
.
56
Select option
DYNAMIC RANGE CONTROL
.
Confirm
OK
.
MENU [AUDIO VIDEO SETTINGS - DYNAMIC RANGE CONTROL]
SELECT
ENTER
RETURN
EXIT
TV ASPECT RATIO
TV TYPE
ADJUST AUDIO RANGE WHEN DOLBY
DIGITAL PLAYBACK SIGNAL IS WEAK.
NORMAL
SHIFT
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT
DYNAMIC RANGE CONTROL
34
Select option.
NORMAL
Unchanged sound output.
SHIFT
With the output of Dolby Digital audio signals, the
volume of quiet sounds is raised and the volume of
loud sounds is reduced.
Confirm
OK
.
Speaker settings
You can connect a surround sound amplifier to the Player. In the speaker settings,
you can set the necessary parameters to do so.
➠
Please also read the notes in the operating instructions for your surround
system.
➠
Remove the disc from the Player before you start adjusting the speaker
settings.
Speaker Set-up
56
In the menu
SETTINGS
select the option
SPEAKER
SETTINGS
.
Confirm
OK
.
MENU [SPEAKER SETTINGS]
SELECT
ENTER
RETURN
EXIT
AUDIO OUTPUT CAN BE SET ACCORDING TO THE CONNECTED
AMPLIFIER AND SPEAKER SYSTEMS.
(WHEN 5.1 CH OUTPUT TERMINAL IS NOT USED, IT IS NOT NECESSARY
TO SET IT.)
DO YOU WANT TO ADJUST THE SPEAKER SETTINGS?
* SPEAKER SETTINGS ARE AVAILABLE, WHEN PCM (SURROUND) SIGNAL IS
SOURCED FROM HDMI TERMINAL.
YES
NO
34
Select option
YES
.
Confirm
OK
.
You will see a menu with the loudspeakers represented as
symbols (
L
: left speaker,
R
: right speaker,
C
: centre speaker,
SW
:
subwoofer,
LS
: left surround speaker,
RS
: right surround speaker)
and their listening position.
TEST START
FINISH
SET THE SPEAKER SIZE, DISTANCE FROM LISTENING POINT, AND THE SOUND
LEVEL TO EACH SPEAKERS. SELECT SPEAKER.
MENU [SPEAKER SETTINGS]
SELECT
ENTER
RETURN
EXIT
LS
2.0m/0dB
3,8m/0dB
L
3,8m/0dB
C
3,8m/0dB
R
SW
0dB
RS
2.0m/0dB
34
Select speaker.
Confirm
OK
.
Initial Set-up
